Biofuels & e-Fuels
Consultant/Trainer: Dr. Colin Schaverien
Join an expert-led training on biofuels and e-fuels, designed for professionals seeking in-depth technical knowledge. Gain insights from a seasoned specialist in Sustainable Aviation Fuels (SAF) and the future of renewable energy. As the demand for low-carbon energy solutions grows, businesses face critical hurdles in scaling up biofuels, integrating new technologies, and complying with evolving regulations. This course equips participants with the technical knowledge and strategic insights needed to address these challenges effectively. Taught by renowned industry leader Dr. Colin Schaverien, an expert in the field of biofuels research, refinery operations, and technology deployment.
Cost
Location
Kuala Lumpur, Malaysia
Dates
TBD
About the Trainer
Following his PhD in Chemistry in Bristol, and postdoctoral fellowships at MIT and UC Berkeley, Dr. Colin Schaverien spent 30 years in various R&D and Innovation leadership roles in Shell.
At Petrogenium, Colin drives the renewables resource section. He supports clients particularly in the areas of biofuels, biorefining, and green chemicals where biorefining means the processing or coprocessing in standard refinery units. He is the expert that can aswer the questions you have regarding Sustainable Air Fuels, Bio fuels and Renewables.
Participants
Participants may include: scientists and technologists from oil & gas, petrochemical and pulp & paper or other bio/e-fuel industries; business managers; government departments interested in renewables; investors from venture capitalists and financial institutions will also highly benefit from this course.
Learning Objectives
1st day – Introduction to biofuels & Advanced biofuels
- 1st generation biofuels such as ethanol and fatty acid methyl esters, the current default solutions for blending in gasoline and diesel, respectively, to achieve mandate compliance
- Hydrotreated vegetable oils (HVO) for diesel blending from the hydrogenation of vegetable oils, used cooking oils, animal fats and other waste feeds.
- Coprocessing of vegetable oils in refinery units such as HDS units
Practical and technological aspects of the hydrotreating processes and coprocessing of vegetable oils including engineering challenges:
- Cellulosic ethanol and butanol
- Gasification of biomass to methanol
- Gasification with Fischer Tropsch to BTL
- Introduction to e-fuels from FischerTropsch processes, to methanol, and to ammonia
- Renewables legislation and subsidies, especially in USA and EU
2nd day – Advanced biofuels & E-fuels: in depth discussion of the various e-fuels and routes
Practical worked examples on technoeconomic evaluations of manufacturing routes, especially of the biofuel processes:
- Sustainable aviation fuels
- Integrated Hydropyrolysis and Hydroconversion (IH2)
- Lanzatech’s conversion of carbon rich flue gases to ethanol
- Alcohol routes to renewable jet and diesel
- Pyrolysis oil from biomass and from waste plastics
- Hydrothermal liquefaction
- Algae as a CO2 sink to produce lipids as sustainable substitutes for vegetable oils
- Technology maturity assessment, scale-up risks, TRL
- Requirements / options for integration of technologies into existing production routes
- Green electricity: basic options, cost projections, associated risks & uncertainties
- For carbon-based materials: sourcing of (green) CO2 feedstocks (options, issues & technologies)
- Basic economic assessments, including projections on expected costs and their evolution
- Projected market potential of products in e-fuels
Programme
1st day – Introduction to biofuels & Advanced biofuels
- 1st generation biofuels such as ethanol and fatty acid methyl esters, the current default solutions for blending in gasoline and diesel, respectively, to achieve mandate compliance
- Hydrotreated vegetable oils (HVO) for diesel blending from the hydrogenation of vegetable oils, used cooking oils, animal fats and other waste feeds.
- Coprocessing of vegetable oils in refinery units such as HDS units
Practical and technological aspects of the hydrotreating processes and coprocessing of vegetable oils including engineering challenges:
- Cellulosic ethanol and butanol
- Gasification of biomass to methanol
- Gasification with Fischer Tropsch to BTL
- Introduction to e-fuels from FischerTropsch processes, to methanol, and to ammonia
- Renewables legislation and subsidies, especially in USA and EU
2nd day – Advanced biofuels & E-fuels: in depth discussion of the various e-fuels and routes
Practical worked examples on technoeconomic evaluations of manufacturing routes, especially of the biofuel processes:
- Sustainable aviation fuels
- Integrated Hydropyrolysis and Hydroconversion (IH2)
- Lanzatech’s conversion of carbon rich flue gases to ethanol
- Alcohol routes to renewable jet and diesel
- Pyrolysis oil from biomass and from waste plastics
- Hydrothermal liquefaction
- Algae as a CO2 sink to produce lipids as sustainable substitutes for vegetable oils
- Technology maturity assessment, scale-up risks, TRL
- Requirements / options for integration of technologies into existing production routes
- Green electricity: basic options, cost projections, associated risks & uncertainties
- For carbon-based materials: sourcing of (green) CO2 feedstocks (options, issues & technologies)
- Basic economic assessments, including projections on expected costs and their evolution
- Projected market potential of products in e-fuels